Structural Waterproofing
- United States
Accessory Products
Adcor™ES
Grace Adcor™ES is a specially engineered, swellable, conformable synthetic waterstop strip that expands when in contact with water. The engineered swell design of Adcor ES minimizes the potential for concrete spalling and cracking versus traditional hydrophilic waterstops.
When fully encapsulated by poured concrete, the expansive forces form a seal against concrete faces. The seal resists hydrostatic pressure, stopping water from entering sub-structures. Adcor ES is a unique product that has been specifically developed to provide better performance than bentonite or conventional swellable rubber waterstops.
|
DATA SHEET
|
GUIDE SPECIFICATIONS
|
Bituthene® Deck Prep®
A low-viscosity, two component, asphalt modified urethane coating used to level and repair rough concrete decks to which Bituthene Waterproofing Membranes will be applied. It cures to flexible rubber-like materials and serves as a fully-adhered temporary waterproofing layer prior to the membrane's installation. May be used appropriately with all Bituthene waterproofing membranes.
|
DATA SHEET
|
Bituthene® Primer B2
A rubber-based primer in solvent specially formulated to provide good initial and excellent permanent adhesion of Bituthene Waterproofing Membranes. In addition, it promotes the adhesion of Bituthene membranes to green concrete, damp surfaces, masonry or wood.
|
DATA SHEET
|
Bituthene® Primer B2 LVC
A low-VOC primer in solvent specially formulated to provide good initial and excellent permanent adhesion of Bituthene Waterproofing Membranes. In addition, it promotes the adhesion of Bituthene membranes to green concrete, damp surfaces, masonry or wood. The VOC (Volatile Organic Compound) content is <200 g/L.
|
DATA SHEET
|
Bituthene® PrimerWP-3000
Bituthene® PrimerWP-3000 is a water-based latex primer which is specifically formulated to bind dust and concrete efflorescence, thereby providing a suitable surface for Bituthene membranes.
|
DATA SHEET
|
|
