-- By Product Category -- Accessory Products Drainage Composites Fillets, Reinforcements, Terminations & Details Fluid-applied Waterproofing Membranes Green Roof Post-applied Waterproofing Membranes Pre-applied Waterproofing Membranes

-- By Applications and Uses -- Above-grade Waterproofing Accessories Below-grade Waterproofing Drainage Systems Green Roof

-- By Brand Name -- Adcor™ES Bituthene® 3000 and Bituthene® Low Temperature (A ... Bituthene® 3000 and Bituthene® Low Temperature (B ... Bituthene® 4000 Conditioner Bituthene® Deck Prep® Bituthene® Deck System Bituthene® Edgeguard® Tape Bituthene® Liquid Membrane Bituthene® Mastic Bituthene® Primer B2 Bituthene® Primer B2 LVC Bituthene® Primer WP-3000 Bituthene® System 4000 (above grade) Bituthene® System 4000 (below grade) Hydroduct 500RS & Hydroduct 550RS Green Roof Composite Hydroduct® 200 Hydroduct® 220 Hydroduct® 225 Hydroduct® 660 Hydroduct® Coil 600 Hydroduct® Tape Preprufe® 200 Preprufe® Low Temperature Waterproofing Membranes (3 ... Preprufe® SCS Waterproofing System For Shotcrete Preprufe® Tape Preprufe® Tieback Cover Preprufe® Waterproofing System (Preprufe® 300R & ... Procor® (above grade) Procor® (below grade) Procor® Composite Waterproofing System Procor® Concrete Sealer Procor® Deck System 3R

Post-applied Waterproofing Membranes

Bituthene® 3000 and Bituthene® Low Temperature (Above Grade)
A composite membrane with a thickness of 1.5mm (0.060 in). It consists of 1.4mm (0.056 in.) of rubberized asphalt and 0.1 mm (0.004 in.) of cross laminated, high density polyethylene film. They combine to provide a tough waterproofing barrier. Bituthene 3000 is self-adhesive and cold applied. Ideal for waterproofing concrete, masonry and wood surfaces where in-service temperatures will not exceed 54° C (130° F). Use with Bituthene Primers.
 |  CSI SPEC DATA  |  DATA SHEET  |  SPECIFICATIONS DATA  |  ANCILLARY PRODUCTS  |  PROJECT PROFILE: SINGAPORE MASS RAPID TRANSIT SYSTEM  |  TECH LETTERS  | 

Bituthene® 3000 and Bituthene® Low Temperature (Below Grade)
A composite membrane with a thickness of 1.5mm (0.060 in). It consists of 1.4mm (0.056 in.) of rubberized asphalt and 0.1 mm (0.004 in.) of cross laminated, high density polyethylene film. They combine to provide a tough waterproofing barrier. Bituthene 3000 is self-adhesive and cold applied. Ideal for waterproofing concrete, masonry and wood surfaces where in-service temperatures will not exceed 54° C (130° F). Use with Bituthene Primers.
 |  CSI SPEC DATA  |  DATA SHEET  |  SPECIFICATIONS DATA  | 

Bituthene® 4000 Conditioner
Water based latex surface treatment imparting an aggressive, high tack finish to the treated substrate. It is specifically formulated to bind site dust and concrete efflorescence, thus providing a suitable surface for the application of Bituthene® System 4000 Waterproofing Membrane. Used to condition all structural concrete, masonry or wood surfaces on which the Membrane will be applied. The conditioner is an integral part of Bituthene System 4000 waterproofing.
 |  CSI SPEC DATA  | 

Bituthene® Deck System
Bituthene® Deck System combines Bituthene® 4000 sheet membranes with Bituthene Deck Prep® to provide a durable waterproofing system capable of accepting a wide variety of wearing surfaces on above occupied space, inverted roofs, green roofs and elevated concrete decks.
 |  DATA SHEET  |  SPECIFICATIONS DATA  | 

Bituthene® System 4000 (above grade)
Self-adhesive HDPE waterproofing membrane with super tacky compound for use with patented, water-based System 4000 Surface Conditioner.
 |  CSI SPEC DATA  |  DATA SHEET  |  SPECIFICATIONS DATA  |  ANCILLARY PRODUCTS  |  TECH LETTERS  | 

Bituthene® System 4000 (below grade)
Self-adhesive HDPE waterproofing membrane with super tacky compound for use with patented, water-based System 4000 Surface Conditioner.
 |  CSI SPEC DATA  |  DATA SHEET  |  PROJECT PROFILE - SONOMA STATE UNIVERSITY  |  SPECIFICATIONS DATA  |  ANCILLARY PRODUCTS  |  TECH LETTERS  |